17 lldp config chassis tx-delay, 18 lldp config chassis tx-hold-mult, 17lldp config chassis tx-delay – Pilz PSSnet SHL 8T MRP User Manual
Page 225: 18lldp config chassis tx-hold-mult

PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.9 LLDP - Link Layer Discovery Protocol
225
4.9.17 lldp config chassis tx-delay
Configure the LLDP transmit delay, the delay between successive LLDP
frame transmissions (unit: seconds, min.: 1 sec., max.: 8192 sec.,
default: 2 sec.).
Format
lldp config chassis tx-delay
Mode
Global Config
Tx-delay
Configure the LLDP transmit delay, the delay between successive
LLDP frame transmissions (unit: seconds, min.: 1 sec., max.: 8192
sec., default: 2 sec.).
4.9.18 lldp config chassis tx-hold-mult
Configure the LLDP transmit hold multiplier, a time-to-live value expressed
as a multiple of the LLDP Message Tx Interval (tx-interval), min.: 2, max.: 10,
default: 4.
Format
lldp config chassis tx-hold-mult
Mode
Global Config
Tx-hold-mult
Configure the LLDP transmit hold multiplier, a time-to-live value
expressed as a multiple of the LLDP Message Tx Interval (tx-interval),
min.: 2, max.: 10, default: 4.