Pilz PSSnet SHL 8T MRP - Manual (Page 117)

CLI Commands: Base
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.5 Syslog Commands
117
4.5.5 logging host
This command enables logging to a host where up to eight hosts can be
configured.
Default
Port - 514; Level - Critical;
Format
logging host
[ []]
Mode
Global Config
Severity number Severity name Meaning
0 emergency Minimum severity to be logged is 0. This is the
highest level and will result in all other messages of
lower levels not being logged.
1 alert Minimum severity to be logged is 1.
2 critical Minimum severity to be logged is 2.
3 error Minimum severity to be logged is 3.
4 warning Minimum severity to be logged is 4.
5 notice Minimum severity to be logged is 5.
6 info Minimum severity to be logged is 6.
7 debug Minimum severity to be logged is 7. This is the lowest
level and will result in messages of all levels being
logged.
Tab. 15: Possible severity levels