11 set igmp, 11set igmp – Pilz PSSnet SHL 8T MRP User Manual
Page 130

130
4.6 Device Configuration Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6.11 set igmp
This command enables IGMP Snooping on the system. The default value is
disable.
Note: The IGMP snooping application supports the following:
D
Global configuration or per interface configuration.
D
Validation of the IP header checksum (as well as the IGMP header check-
sum) and discarding of the frame upon checksum error.
D
Maintenance of the forwarding table entries based on the MAC address
versus the IP address.
D
Flooding of unregistered multicast data packets to all ports in the VLAN.
Format
set igmp
Mode
Global Config
U
no set igmp
This command disables IGMP Snooping on the system.
Format
no set igmp
Mode
Global Config