Pilz PSSnet SHL 8T MRP - Manual (Page 103)

CLI Commands: Base
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.4 Management Commands
103
4.4.37 snmp-server enable traps linkmode
This command enables Link Up/Down traps for the entire switch. When en-
abled, link traps are sent only if the Link Trap flag setting associated with the
port is enabled (see ‘snmp trap link-status’ command).
Default
enabled
Format
snmp-server enable traps linkmode
Mode
Global Config
U no snmp-server enable traps linkmode
This command disables Link Up/Down traps for the entire switch.
Format
no snmp-server enable traps linkmode
Mode
Global Config