Pilz PSSnet SHL 8T MRP - Manual (Page 87)

CLI Commands: Base
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.4 Management Commands
87
0.0.0.0, an IP Address of 0.0.0.0 matches all IP addresses. The
default value is 0.0.0.0
Client IP Mask -
A mask to be ANDed with the requesting entity's IP address before
comparison with IP Address. If the result matches with IP Address
then the address is an authenticated IP address. For example, if the
IP Address = 9.47.128.0 and the corresponding Subnet Mask =
255.255.255.0 a range of incoming IP addresses would match, i.e.
the incoming IP Address could equal 9.47.128.0 - 9.47.128.255. The
default value is 0.0.0.0
Access Mode
The access level for this community string.
Status
The status of this community access entry.