Pilz PSSnet SHL 8T MRP - Manual (Page 173)

PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6 Device Configuration Commands
173
4.6.62 vlan0-transparent-mode
Activate the “Transparent Mode“ to be able to switch priority tagged frames
without a VLAN affiliation thus with VLAN-ID “0”.
In this mode the VLAN-ID “0” persists in the frame, irrespective of the Port
VLAN ID setting in the “VLAN Port“ dialog.
Note for PSSnet SHL:
In transparency mode devices ignore the configured port vlan id. Set the vlan
membership of the ports from vlan 1 to untagged or member.
Format
vlan0-transparent-mode {disable|enable}
Mode
VLAN database