Pilz PSSnet SHL 8T MRP - Manual (Page 220)

220
4.9 LLDP - Link Layer Discovery Protocol
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.9.11 show lldp config port tlv
This command shows all LLDP TLV configuration settings (if the given infor-
mation is included in the sent LLDP frames or not) concerning one or all
ports.
Format
show lldp config port <{slot/port|all}> tlv
Mode
Privileged EXEC and User EXEC
link-aggregation
Display the port's LLDP TLV inclusion of Link Aggregation.
mac-phy-config-state
Display the port's LLDP TLV inclusion of MAC Phy. Cfg. State.
max-frame-size
Display the port's LLDP TLV inclusion of Max. Frame Size.
mgmt-addr
Display the port's LLDP TLV inclusion of Management Address.
port-desc
Display the port's LLDP TLV inclusion of Port Description.
port-vlan
Display the port's LLDP TLV inclusion of Port VLAN.
protocol
Display the port's LLDP TLV inclusion of Protocol.
sys-cap
Display the port's LLDP TLV inclusion of System Capabilities.
sys-desc
Display the port's LLDP TLV inclusion of System Description.
sys-name
Display the port's LLDP TLV inclusion of System Name.
vlan-name
Display the port's LLDP TLV inclusion of VLAN Name.