Pilz PSSnet SHL 8T MRP - Manual (Page 214)

214
4.8 System Utilities
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.8.25 reboot
This command resets the switch (cold start, See “reload” on page 214 ).
Reset means that all network connections are terminated and the boot code
executes. The switch uses the stored configuration to initialize the switch.
You are prompted to confirm that the reset should proceed. A successful
reset is indicated by the LEDs on the switch.
Format
reboot
Mode
Privileged EXEC
4.8.26 reload
This command resets the switch (warm start, See “reboot” on page 214 ).
Reset means that all network connections are terminated and the boot code
executes. The switch uses the stored configuration to initialize the switch.
You are prompted to confirm that the reset should proceed. A successful
reset is indicated by the LEDs on the switch.
Format
reload
Mode
Privileged EXEC