Pilz PSSnet SHL 8T MRP - Manual (Page 265)

CLI Commands: Switching
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
5.1 Spanning Tree Commands
265
5.1.8 spanning-tree
This command sets the spanning-tree operational mode to enabled.
Default
disabled
Format
spanning-tree
Mode
Global Config
U no spanning-tree
This command sets the spanning-tree operational mode to disabled.
While disabled, the spanning-tree configuration is retained and can be
changed, but is not activated.
Format
no spanning-tree
Mode
Global Config