Pilz PSSnet SHL 8T MRP - Manual (Page 312)

CLI Commands: Switching
312
5.7 DHCP Relay Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
5.7.2 dhcp-relay
Set different options for BOOTP/DHCP relay and option 82 inclusion.
Format
dhcp-relay {opt82 {operation {disable|enable}|
man-id |
remote-id-type {client-id|ip|mac|other}|
server-address Address>
Mode
Global Config
dhcp-relay opt82 operation {disable|enable}
Enable/Disable option 82 globally. Default: enable.
dhcp-relay opt82 man-id
Configure the DCHP Relay's Option 82 Manual Value for the Remote
ID Type (only effective, if Remote ID is set to ”other“). Default: no ID.
dhcp-relay opt82 remote-id-type {client-id|ip|mac|other}
Configure the DCHP Relay's Option 82 Remote ID Type.
Default: mac
dhcp-relay server-address
Set the server IP address for one of the 4 possible server IDs.
Default: 0.0.0.0
U no dhcp-relay
Clear the DCHP Relay configuration (set all server addresses to 0.0.0.0).
Format
no dhcp-relay
Mode
Global Config