15 sntp client request-interval, 16 no sntp client server, 17 sntp client server primary – Pilz PSSnet SHL 8T MRP User Manual
Page 243: 15sntp client request-interval, 16no sntp client server, 17sntp client server primary
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.10 SNTP - Simple Network Time Protocol
243
4.10.15sntp client request-interval
The synchronization interval in seconds, default: 30.
Format
sntp client request-interval <1-3600>
Mode
Global Config
4.10.16no sntp client server
Disable the SNTP client servers.
Format
no sntp client server
Mode
Global Config
4.10.17sntp client server primary
Set the SNTP Client's primary server IP Address, default: 0.0.0.0 (none).
Format
sntp client server primary
Mode
Global Config
This manual is related to the following products: