23 spanning-tree stp-mrp-mode, 23spanning-tree stp-mrp-mode – Pilz PSSnet SHL 8T MRP User Manual
Page 281
CLI Commands: Switching
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
5.1 Spanning Tree Commands
281
5.1.23 spanning-tree stp-mrp-mode
This command sets the spanning tree mrp (Media Redundancy
Protocol) mode to enabled.
Default
disabled
Format
spanning-tree stp-mrp-mode
Mode
Global Config
U
no spanning-tree stp-mrp-mode
This command sets the spanning tree mrp (Medium Redundancy
Protocol) mode to disabled.
Format
no spanning-tree stp-mrp-mode
Mode
Global Config
This manual is related to the following products: