13 spanning-tree forceversion, 13spanning-tree forceversion – Pilz PSSnet SHL 8T MRP User Manual
Page 270

CLI Commands: Switching
270
5.1 Spanning Tree Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
5.1.13 spanning-tree forceversion
This command sets the Force Protocol Version parameter to a new value.
The Force Protocol Version can be one of the following:
D
802.1d - ST BPDUs are transmitted
(IEEE 802.1d functionality supported)
D
802.1w - RST BPDUs are transmitted
(IEEE 802.1w functionality supported)
Default
802.1w
Format
spanning-tree forceversion <802.1d | 802.1w>
Mode
Global Config
U
no spanning-tree forceversion
This command sets the Force Protocol Version parameter to the default
value, i.e. 802.1w.
Format
no spanning-tree forceversion
Mode
Global Config
This manual is related to the following products: