Pilz PSSnet SHL 8T MRP - Manual (Page 64)

CLI Commands: Base
64
4.1 System Information and Statistics Com-
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.1.22 show temperature
This command displays the lower and upper temperature limit for sending a
trap.
Format
show temperature
Mode
Privileged EXEC and User EXEC
4.1.23 snmp-server
This command sets the name and the physical location of the switch, and the
organization responsible for the network.The range for name, location and
contact is from 0 to 64 alphanumeric characters.
Default
None
Format
snmp-server {sysname | location | con-
tact }
Mode
Global Config