Pilz PSSnet SHL 8T MRP - Manual (Page 133)

PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6 Device Configuration Commands
133
4.6.15 set igmp forward-all
This command activates the forwarding of multicast frames to this interface
even if the given interface has not received any reports by hosts. N. B.: this
applies only to frames that have been learned via IGMP Snooping. The pur-
pose is that an interface (e. g. a HIPER Ring's ring port) may need to forward
all such frames even if no reports have been received on it. This enables fast-
er recovery from ring interruptions for multicast frames.
Default
disabled
Format
set igmp forward-all
Mode
Interface Config
U no set igmp forward-all
This command disables the forwarding of all multicast frames learned via
IGMP Snooping on a selected interface.
Format
no set igmp forward-all
Mode
Interface Config