Pilz PSSnet SHL 8T MRP - Manual (Page 210)

210
4.8 System Utilities
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
trap
Configure if a trap is sent when the device status changes its state.
– enable enables sending traps,
– disable disables sending traps.
4.8.20 logout
This command closes the current telnet connection or resets the current se-
rial connection.
Note: Save configuration changes before logging out.
Format
logout
Mode
Privileged EXEC