Pilz PSSnet SHL 8T MRP - Manual (Page 258)

CLI Commands: Switching
258
5.1 Spanning Tree Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
STP BPDUs Received
Spanning Tree Protocol Bridge Protocol Data Units received.
RST BPDUs Transmitted
Rapid Spanning Tree Protocol Bridge Protocol Data Units sent
RST BPDUs Received
Rapid Spanning Tree Protocol Bridge Protocol Data Units received.
MSTP BPDUs Transmitted
Multiple Spanning Tree Protocol Bridge Protocol Data Units sent
MSTP BPDUs Received
Multiple Spanning Tree Protocol Bridge Protocol Data Units received.
5.1.3 show spanning-tree mst detailed
This command displays settings and parameters for the specified multiple
spanning tree instance. The instance is a number that corresponds
to the desired existing multiple spanning tree instance ID. The following de-
tails are displayed.
Format
show spanning-tree mst detailed
Mode
Privileged EXEC and User EXEC
MST Instance ID
Valid value: 0
MST Bridge Priority
Valid values: 0-61440 in increments of 4096.
Time Since Topology Change
in seconds