26 snmp-server community, 26snmp-server community – Pilz PSSnet SHL 8T MRP User Manual
Page 94

CLI Commands: Base
94
4.4 Management Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.4.26 snmp-server community
This command adds a new SNMP community name. A community name is
a name associated with the switch and with a set of SNMP managers that
manage it with a specified privileged level. The length of name can be up to
32 case-sensitive characters.
Note: Community names in the SNMP community table must be unique.
When making multiple entries using the same community name, the first
entry is kept and processed and all duplicate entries are ignored.
Default
Two default community names: Public and Private. You can replace
these default community names with unique identifiers for each com-
munity. The default values for the remaining four community names
are blank.
Format
snmp-server community <
name>
Mode
Global Config
U
no snmp-server community
This command removes this community name from the table. The name
is the community name to be deleted.
Format
no snmp-server community <
name>
Mode
Global Config