19 lldp chassis tx-interval, 20 clear lldp config all, 19lldp chassis tx-interval – Pilz PSSnet SHL 8T MRP User Manual
Page 226: 20clear lldp config all
226
4.9 LLDP - Link Layer Discovery Protocol
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.9.19 lldp chassis tx-interval
Configure the interval at which LLDP frames are transmitted on behalf of this
LLDP agent (unit: seconds, min.: 5 sec., max.: 32768 sec., default: 30 sec.)
Format
lldp chassis tx-interval
Mode
Global Config
Tx-interval
Configure the interval at which LLDP frames are transmitted on behalf
of this LLDP agent (unit: seconds, min.: 5 sec., max.: 32768 sec.,
default: 30 sec.).
4.9.20 clear lldp config all
Clear the LLDP configuration, i. e., set all configurable parameters to default
values (all chassis- as well as port-specific parameters at once). Note: LLDP
Remote data remains unaffected.
Format
clear lldp config all
Mode
Privileged EXEC