Pilz PSSnet SHL 8T MRP - Manual (Page 10)

Content
10
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
5.10 SNTP - Simple Network Time Protocol 235
5.10.1show sntp 235
5.10.2show sntp anycast 235
5.10.3show sntp client 236
5.10.4show sntp operation 237
5.10.5show sntp server 237
5.10.6show sntp status 238
5.10.7show sntp time 239
5.10.8no sntp 239
5.10.9sntp anycast address 240
5.10.10sntp anycast transmit-interval 240
5.10.11sntp anycast vlan 241
5.10.12sntp client accept-broadcast 241
5.10.13sntp client disable-after-sync 242
5.10.14sntp client offset 242
5.10.15sntp client request-interval 243
5.10.16no sntp client server 243
5.10.17sntp client server primary 243
5.10.18sntp client server secondary 245
5.10.19sntp client threshold 246
5.10.20sntp operation 247
5.10.21sntp server disable-if-local 247
5.10.22sntp time system 248
5.11 PoE - Power over Ethernet 249
5.11.1show inlinepower 249
5.11.2show inlinepower port 249
5.11.3inlinepower 250
5.11.4inlinepower 251
5.11.5clear inlinepower
251
6 CLI Commands: Switching 253
6.1 Spanning Tree Commands 255
6.1.1 show spanning-tree 255
6.1.2 show spanning-tree interface 257
6.1.3 show spanning-tree mst detailed 258
6.1.4 show spanning-tree mst port detailed 259
6.1.5 show spanning-tree mst port summary 262
6.1.6 show spanning-tree summary 263
6.1.7 show spanning-tree vlan 264
6.1.8 spanning-tree 265