9 users snmpv3 accessmode – Pilz PSSnet SHL 8T MRP User Manual
Page 195

PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.7 User Account Management Commands
195
4.7.9 users snmpv3 accessmode
This command specifies the snmpv3 access privileges for the specified login
user. The valid accessmode values are readonly or readwrite. The
applies. The default is readwrite for ‘admin’ user; readonly for all other
users
Default
admin -- readwrite; other -- readonly
Format
users snmpv3 accessmode
Mode
Global Config
U
no users snmpv3 accessmode
This command sets the snmpv3 access privileges for the specified login
user as readwrite for the ‘admin’ user; readonly for all other users.
The
mode will apply.
Format
no users snmpv3 accessmode
Mode
Global Config