8 system utilities, 1 address-conflict, 2 clear eventlog – Pilz PSSnet SHL 8T MRP User Manual
Page 199: System utilities, 1 address-conflict 199 5.8.2 clear eventlog
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.8 System Utilities
199
4.8
System Utilities
This section describes system utilities.
4.8.1 address-conflict
This command configures the setting for detection possible address conflicts
of the agent´s IP address with other devices´ IP addresses in the network.
Format
address-conflict {detection-mode {active-only|dis-
able|enable|passive-only}|ongoing-detection {dis-
able|enable} }
Mode
Global Config
detection mode
Configure the device's address conflict detection mode (active-only,
disable, enable or passive-only). Default: enable.
ongoing detection
Disable or enable the ongoing address conflict detection.
Default: enable.
4.8.2 clear eventlog
Clear the event log. The CLI will ask for confirmation.
Answer y (yes) or n (no).
The CLI displays the end of this operation.