7 vlan port priority all, 8 vlan priority – Pilz PSSnet SHL 8T MRP User Manual
Page 73

CLI Commands: Base
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.3 Class of Service (CoS) Commands
73
4.3.7 vlan port priority all
This command configures the port priority assigned for untagged packets for
all ports presently plugged into the device. The range for the priority is 0-7.
Any subsequent per port configuration will override this configuration setting.
Format
vlan port priority all
Mode
Global Config
4.3.8 vlan priority
This command configures the default 802.1p port priority assigned for un-
tagged packets for a specific interface. The range for the priority is 0-7
Default
0
Format
vlan priority
Mode
Interface Config
This manual is related to the following products: