Pilz PSSnet SHL 8T MRP - Manual (Page 263)

CLI Commands: Switching
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
5.1 Spanning Tree Commands
263
5.1.6 show spanning-tree summary
This command displays spanning tree settings and parameters for the
switch. The following details are displayed on execution of the command.
Format
show spanning-tree summary
Mode
Privileged EXEC and User EXEC
Spanning Tree Adminmode
Enabled or disabled.
Spanning Tree Version
Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or
IEEE 802.1d) based upon the Force Protocol Version parameter
Configuration Name
Configured name.
Configuration Revision Level
Configured value.
Configuration Digest Key
Calculated value.
Configuration Format Selector
Configured value.
MST Instances
List of all multiple spanning tree instances configured on the switch