Pilz PSSnet SHL 8T MRP - Manual (Page 163)

PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6 Device Configuration Commands
163
4.6.48 snmp trap link-status
This command enables link status traps by interface.
Note: This command is valid only when the Link Up/Down Flag is enabled.
See ‘snmp-server enable traps linkmode’ command.
Format
snmp trap link-status
Mode
Interface Config
U no snmp trap link-status
This command disables link status traps by interface.
Note: This command is valid only when the Link Up/Down Flag is en-
abled. See ‘snmp-server enable traps linkmode’ command).
Format
no snmp trap link-status
Mode
Interface Config