Pilz PSSnet SHL 8T MRP - Manual (Page 295)

CLI Commands: Switching
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
5.4 Fast-HIPER-Ring
295
5.4 Fast-HIPER-Ring
The concept of the Fast-HIPER-Ring enables the construction of high-avail-
ability, ring-shaped network structures. Within such a ring topology, network
components supporting the Fast-HIPER-Ring are connected with each other
via their ring ports. Exactly one redundancy manager assumes control of the
ring.
These commands are for configuring the Hirschmann Fast High Perfor-
mance Redundancy Ring.
Further information concerning this function you will find in the User Manual
”Redundancy Configuration”.
This command displays the settings and states of the HIPER-Ring. The fol-
lowing details are displayed on execution of the command.
Format
show fast-hiper-ring
Mode
Privileged EXEC and User EXEC
Ring ID
Display the Ring ID.
Mode of Switch (administrative setting)
Display the HIPER-Ring mode administrative settings.
Mode of Switch (real operating state)
Display the HIPER-Ring operation mode.
Ring Name
Display theFast-HIPER-Ring's name.
Number of nodes in the ring
Display the number of nodes in the ring.
Port Number, Primary
Display the HIPER-Ring's primary port number and its properties.
Port Number, Secondary
Display the HIPER-Ring's secondary port number and its properties.