Pilz PSSnet SHL 8T MRP - Manual (Page 101)

CLI Commands: Base
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.4 Management Commands
101
4.4.35 snmp-server enable traps chassis
Configures whether traps that are related to the chassis functionality of the
switch will be sent. These functions include the signal contacts, the ACA,
temperature limits exceeded, changes in the module map, addition or
removal of SFP modules, status of power supply has changed and the LLDP
and SNTP features. May be enabled or disabled.
Default: enabled.
Default
enabled
Format
snmp-server enable traps chassis
Mode
Global Config
U no snmp-server enable traps chassis
This command disables chassis traps for the entire switch.
Format
no snmp-server enable traps chassis
Mode
Global Config