Pilz PSSnet SHL 8T MRP - Manual (Page 80)

CLI Commands: Base
80
4.4 Management Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.4.10 network priority
This command configures the VLAN priority or the IP DSCP value for out-
going management packets. The is specified as either an integer
from 0-63, or symbolically through one of the following keywords:
af11,af12,af13,af21,af22,af23,af31,af32,af33,af41,af42,af43,be,cs0, cs1,
cs2,cs3,cs4,cs5,cs6,cs7,ef.
Default
0 for both values
Format
network priority {dot1p-vlan <0-7> |
ip-dscp }
Mode
Privileged EXEC
U no network priority
This command sets the VLAN priority or the IP DSCP value for outgoing
management packets to default which means VLAN priority 0 or
IP DSCP value 0 (Best effort).
Format
no network priority {dot1p-vlan | ip-dscp }
Mode
Privileged EXEC