Pilz PSSnet SHL 8T MRP - Manual (Page 110)

CLI Commands: Base
110
4.4 Management Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.4.44 snmptrap snmpversion
This command configures SNMP trap version for a specified community.
Format
snmptrap snmpversion
{snmpv1 | snmpv2}
Mode
Global Config
name
Enter the community name.
ipAaddr
Enter the IP Address.
snmpv1
Use SNMP v1 to send traps.
snmpv2
Use SNMP v2 to send traps.