Pilz PSSnet SHL 8T MRP - Manual (Page 196)

196
4.7 User Account Management Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.7.10 users snmpv3 authentication
This command specifies the authentication protocol to be used for the specified login
user. The valid authentication protocols are
none , md5 or sha . If md5 or sha are
specified, the user login password is also used as the snmpv3 authentication
password and therefore must be at least eight characters in length. The
is the login user name associated with the authentication pro-
tocol.
Default
no authentication
Format
users snmpv3 authentication | sha>
Mode
Global Config
U no users snmpv3 authentication
This command sets the authentication protocol to be used for the speci-
fied login user to none. The is the login user name for
which the specified authentication protocol will be used.
Format
users snmpv3 authentication
Mode
Global Config