10 sntp - simple network time protocol, 1 show sntp, 2 show sntp anycast – Pilz PSSnet SHL 8T MRP User Manual
Page 235: Sntp - simple network time protocol, 1show sntp, 2show sntp anycast

PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.10 SNTP - Simple Network Time Protocol
235
4.10 SNTP - Simple Network
Time Protocol
These commands show and configure the SNTP parameters.
4.10.1 show sntp
This command shows all SNTP settings.
Format
show sntp
Mode
Privileged EXEC and User EXEC
4.10.2 show sntp anycast
This command shows all SNTP anycast configuration settings.
Format
show sntp anycast
Mode
Privileged EXEC and User EXEC
address
Show the SNTP server's anycast destination IP Address.
This manual is related to the following products: