11 clear pass, 12 clear signal-contact, 13 clear traplog – Pilz PSSnet SHL 8T MRP User Manual
Page 204: 11clear pass, 12clear signal-contact, 13clear traplog

204
4.8 System Utilities
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.8.11 clear pass
This command resets all user passwords to the factory defaults without pow-
ering off the switch. You are prompted to confirm that the password reset
should proceed.
Format
clear pass
Mode
Privileged EXEC
4.8.12 clear signal-contact
This command clears the signal-contact output configuration.
Switches the signal contact 1´s mode to auto and its manual setting to open.
Switches the signal contact 2´s mode to manual and its manual setting to
closed.
Enables the monitoring of the power supplies for signal contact 1 only.
Disables the sending of signal contact traps.
Format
clear signal-contact
Mode
Privileged EXEC
4.8.13 clear traplog
This command clears the trap log.
Format
clear traplog