Pilz PSSnet SHL 8T MRP - Manual (Page 116)

CLI Commands: Base
116
4.5 Syslog Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.5.4 logging console
This command enables logging to the console. The value is
specified as either an integer from 0 to 7 or symbolically through one of the
following keywords: emergency (0), alert (1), critical (2), error (3), warning
(4), notice (5), informational (6), debug (7).
Default
disabled; alert
Format
logging console [severitylevel]
Mode
Global Config
U no logging console
This command disables logging to the console.
Format
no logging console