Pilz PSSnet SHL 8T MRP - Manual (Page 47)

CLI Commands: Base
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.1 System Information and Statistics Com-
47
4.1.13 show interface
This command displays a summary of statistics for a specific port or a count
of all CPU traffic based upon the argument.
Format
show interface { < slot/port > | switchport}
Mode
Privileged EXEC and User EXEC
The display parameters, when the argument is ' ', is as follows :
Packets Received Without Error
The total number of packets (including broadcast packets and multi-
cast packets) received by the processor.
Packets Received With Error
The number of inbound packets that contained errors preventing
them from being deliverable to a higher-layer protocol.
Broadcast Packets Received
The total number of packets received that were directed to the broad-
cast address. Note that this does not include multicast packets.
Packets Transmitted Without Error
The total number of packets transmitted out of the interface.
Transmit Packets Errors
The number of outbound packets that could not be transmitted
because of errors.
Collisions Frames
The best estimate of the total number of collisions on this Ethernet
segment.
Time Since Counters Last Cleared
The elapsed time, in days, hours, minutes, and seconds since the
statistics for this port were last cleared.
The display parameters, when the argument is 'switchport', is as follows :
Packets Received Without Error
The total number of packets (including broadcast packets and multi-
cast packets) received by the processor.