Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 99)

HOME
screen
or
MENU
1screen
MENU 2 screen
99
Fu
n
c
tio
n
SW Select
1
(Select switch selection)
Select "Function" of the switch you want to set by (JOG) button up, down, left, or right op-
eration, and press the (JOG) switch.
Function select switch setup
2
(Function setup)
A function list is displayed. Select the desired function by (JOG)
button up or down operation, and press the (JOG) button.
(Changing the operation direction)
Select "Dir" of the switch you want to set by (JOG) button up, down,
left, or right operation, and switch the direction by (+) or (-) button.
(Changing the type of operation)
Select "Type" of the switch you want to set by (JOG) button up,
down, left, or right operation and switch the type by (+) or (-) button.
3
When ending setting, return to the menu screen by pressing the (END) button.
l t it h t
SW Select
This function allows selection of the function to be performed by the switches
(PS1, PS2, PS3, PS4, PS5, throttle trigger) and setting of the direction, etc. of operation.
-The table in the next page lists the functions that can be assigned to each push switch.
-All switches can be made alternating operations (ON/OFF switched each time SW pressed).
(NOR/ALT)
-The ON/OFF direction can be reversed. The reverse select function always starts from the ON
state. However, the trigger switch is different, depending on the position. (NOR/REV)
Setup buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen.
Initial value:
"OFF", "Nor", "Nor"
Setup switch selection
- Select by (JOG) button up,
down operation.
Setup items
Function
Dir
Type
Press
Press
Press
Pu h Press
Pu h Press
Pu h Press