Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 104)

104
Fu
n
c
tio
n
Timer Function
Timer Function
Use the timer by selecting one of the four timers Up timer, Fuel down timer, Lap timer and
Lap navigate timer.
Up timer function
- The Up timer can be used to count the time between start and stop, etc.
- The timer repeatedly starts and stops each time
the switch is operated and accumulates the time
between each start and stop. (When the count
reaches 99 minutes 59 seconds, it returns to 00
minutes 00 seconds and repeats the count.)
- The first start operation can be linked to the
throttle trigger.
- An alarm sound can be set. The passage of time
is announced by sounding of a buzzer (beeps)
each minute after starting.
- Alarm :Generates a beep at the set time (minutes).
- Prealarm :Alarm advance announcement sound. Sounding begins 10 seconds before the set alarm
time.
- After starting, the timer is enabled and can be stopped by switch even when the display
switches to another screen.
Fuel down timer function
The fuel down timer is used primarily to check the refueling time of gasoline engine cars.
(The remaining time is displayed.)
- Each time the switch is pressed, the timer is
restarted and the set time is counted down. The
start time becomes the alarm set time. (When
counted down to 00 minutes 00 seconds, the timer
becomes an Up timer.)
- The fuel down timer can be initially started by
throttle trigger.
- An audible alarm can be set. In addition, the
passing of time is indicated by sounding of a
buzzer each minute after starting.
- Alarm :Buzzer sounds at the set time (minute).
- Prealarm :Alarm advance announcement sound. Sounding begins 10 seconds before the set alarm
time.
- After starting, the timer continues to count even if the LCD switches to another screen.