Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 92)

Mixing menu screen
or
Press
Pu h Press
Press Pu h
Press
92
Fu
n
c
tio
n
CPS Mixing
CPS mixing
ON
When CPS mixing is set,
CPS ON/OFF is displayed
in a pop-up window on the
home screen.
This function controls the Futaba CPS-1 channel power switch.
Normally, when using the CPS-1 unit to light the vehicle dress-up and other illumination
(LED) the CPS-1 unit with LED connected is connected to a vacant switch channel and the
LEDs are turned on and off by switch while the vehicle is running. However, when the CPS
PL[LQJIXQFWLRQLVXVHGWKH/('FDQEHWXUQHGRQDQGRIIDQGÀDVKHGLQVWHSZLWKVWHHULQJ
DQGWKURWWOHRSHUDWLRQDVZHOODVEHLQJWXUQHGRQDQGRIIE\VZLWFK7KHÀDVKLQJVSHHGF\FOH
can also be set.
)RULQVWDQFHWKH/('FDQEHÀDVKHGDVDEUDNHOLJKWE\WKURWWOHEUDNHVLGHRSHUDWLRQ
CPS Mixing
The mixing function is assigned to CH3 and CH4. Channels used by other mixing can-
QRWEHXVHG:KHQWKHQXPEHURIFKDQQHOVLVLQVXI¿FLHQWFDQFHOWKHRWKHUPL[LQJ
The mixing used can be confirmed on
the Auxility screen. (p.155)
When CPS mixing is set to
"ON", the CPS-1 used chan-
nel setup screen is displayed.
CPS mixing screen from mixing menu screen (p.79)
Channel is selected by
(JOG) button operation.
When the gain is switched by
a switch, a pop-up window
appears on the home screen
to announce the gain.