Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 65)

Setting item
Mode
:Speed type selection
High :High side range speed
adjustment
Middle :Medium speed range
speed adjustment
Low :Low side range speed
adjustment
Point1 :Low and medium speed
switching point
Setup item selection
- Select by (JOG) button up or down operation.
Adjustment buttons
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Initial value
Low, Middle, High:"100"
Point1 :30
Point2 :60
Speed type Select button
- Select with the (+) or (-) but-
tons.
The Low and High ranges are
linked with the Point1,2 set
points and displayed.
Throttle trigger position
Adjustment range
High :1~100
Middle :1~100
Low :1~100
At 100%, there is no delay.
Point1 :1~100
Point2 :1~100
65
Fu
n
c
tio
n
Throttle Speed
Adjustment method for 3 Speed
(Preparation)
- Select the setting item "Mode" by (JOG) button up or down op-
eration. Press the (+) or (-) button and select "3".
1
("Low", "Middle", and "High" delay adjustment)
Select the setting item "Low", "Middle", or "High" by (JOG)
button up or down operation.
2
(Speed switching point adjustment)
When you want to change the "Low", "Middle", and "High"
switching point, select setting item "Point1" or "Point2" by
(JOG) button up or down operation.
3
When ending setting, return to the speed screen by pressing the (END) button.