Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 131)

HOME
screen
MENU 2
screen
or
MENU 1 screen
Information display
Receiver -Voltage display
Temperature display
EXT-Voltage display
RPM display
131
Fu
n
c
tio
n
Telemetry
Telemetry Menu
It is necessary to turn on the telemetry on the receiver setting screen to use the telemetry func-
tion. (p.46)
This screen displays and sets the various information from the receiver. An alarm and vibra-
tion can be generated depending on the information. The alarm and the vibration are set by
HDFKLQIRUPDWLRQVFUHHQ)RUH[DPSOHDGURSLQWKHYROWDJHRIWKHUHFHLYHUEDWWHU\KRXVHG
in the model car can be reported by an alarm.
The telemetry data received last is memorized. Therefore, even if the receiver power is
turned off, information display, audio guide, and alarms remain until the transmitter power
is turned off.
7KHVSHHFKIXQFWLRQFDQEHWXUQHGRQDQGRIIZLWKWKHVSHFL¿HGVZLWFK6HHWKHIXQFWLRQ
select switch function (p.99).
(Preparation)
The sensor used is connected with the receiver referring to the connection diagram of page
130.
1
(Telemetry act)
The telemetry is turned on on the receiver setting screen.
(p.46)
It comes to be able to display telemetry information.
Using Telemetry function
2
When ending setting, return to the menu screen by pressing the (END) button.
Each information is described in detail beginning from page132.
Press
Press
Press
Pre Press