Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 63)

or
MENU 1 screen
HOME
screen
MENU 2
screen
Press
Press
Press
1 SPEED
A delay is set over the entire
throttle range.
2 SPEED
A delay can be set in 2 ranges
with Point1 as the boundary.
3 SPEED
A delay can be set in 3 ranges with
Point1 and Point2 as the boundaries.
Point1
high
neutral
high
neutral
high
neutral
Point2 Point1
ALL
Low
High
Low
High
Middle
-Throttle servo (ESC) operation is delayed so that the drive wheels will not spin even if
the trottle trigger is operated more than necessary. This delay function is not performed
when the throttle trigger is returned and at brake operation.
-1 speed, 2 speed, or 3 speed can be selected.
Operation
Mode selection
One speed, 2 speed, or 3 speed can be selected at the "Mode"
item. The setting item (screen) depends on the mode. The figure at
the above is the 3 speed setup screen.
Pre Press
Pre Press
Press
63
Fu
n
c
tio
n
With "Throttle speed":
Quick start without skidding Without "Throttle speed":
Slow start due to skidding
Throttle Speed
Throttle Speed (Throttle system)
Sudden throttle trigger operation on a slippery road only causes the wheels to spin and the
vehicle cannot accelerate smoothly. Setting the throttle speed function reduces wasteful bat-
tery consumption while at the same time permitting smooth, enjoyable operation.