Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 109)

Alarm time
OFF, 1 ~ 99 m
Initial value: 5 m
Grip vibrator type
Inhibit(Off),
Type1,2,3
Initial value: Inhibit
Prealarm time
OFF, ON
Initial value: OFF
Status display
Ready:
Throttle trigger operation wait
Timer start:
Timer running/ Timer stopped
Timer start/ reset
Will not start if the last lap timer is
not reset
109
Fu
n
c
tio
n
Timer Function
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1
sec) to return to the initial
screen.
Switches
Timer start :start / stop
Lap reset
:stop / reset
(Preparation)
Select the setting item "Mode" by (JOG) button up or down
operation. Press the (+) or (-) button and select "Lap timer".
1
(Alarm time setting)
Select the setting item "Alarm"
by (JOG) button up, down, left, or
right operation and set the alarm
time with the (+) and (-) buttons.
The setting item at the right side
of the alarm time is the alarm vi-
bration setting. Select one of the 3
patterns or inhibit (OFF) by (+) or
(-) button.
(Pre alarm time setting)
Select the setting item "Pre-alarm" by (JOG) button up,
down, left, or right operation, and set the pre alarm to the ac-
tive state by pressing the (+) or (-) button.
2
(Timer start/lap count operation)
Perform the start and lap count operations with the switch
("Timer start") assigned by function select switch function.
- Linking only start to the throttle
trigger.
Select the setting item "Timer start"
by (JOG) button up, down, left, or
right operation and press the (+)
and (-) buttons simultaneously for
about 1 second. The set beeps and
the timer display changes from "Timer start" to "Ready" and
the set enters the trigger operation ready state. (Status display
"Timer star")
3
(Timer stop/reset operation)
When the lap count switch or
"Timer reset" switch is pressed
after the time set by "Alarm" has
elapsed and the lap time, total
time, and average lap time are
saved and checked. (Lap list p.111)
If the switch ("Timer reset") set by switch setting function is
pressed, the timer is reset. When a switch is not set, select
"Timer reset" by (JOG) button up or down operation, and
press the (JOG) button. A beeping sound is generated and
the timer and lap list are reset.
Using the Lap timer
Be careful because timer reset
clears the lap list.