Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 107)

Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen.
Switches
Timer start :start / stop
Lap reset
:stop / reset
Timer start/ reset
Alarm time
OFF, 1 ~ 99 m
Initial value: 5 m
Grip vibrator type
Inhibit(Off),
Type1,2,3
Initial value: Inhibit
Prealarm time
OFF, ON
Initial value: OFF
Status display
Ready:
Throttle trigger operation wait
Timer start:
Timer running/ Timer stopped
107
Fu
n
c
tio
n
Timer Function
(Preparation)
Select the setting item "Mode" by (JOG) button up or down
operation. Press the (+) or (-) button and select "Up timer".
1
(Alarm time setting)
Select the setting item "Alarm" by (JOG) button up, down,
left, or right operation and set the alarm time with the (+) and
(-) buttons.
The setting item at the right side
of the alarm time is the alarm vi-
bration setting. Select one of the 3
patterns or inhibit (OFF) by (+) or
(-) button.
(Pre alarm time setting)
Select the setting item "Pre-alarm" by (JOG) button up,
down, left, or right operation, and set the pre alarm to the ac-
tive state by pressing the (+) or (-) button.
2
(Timer start/stop operation)
When the switch ("Timer start") assigned by function select
switch function is pressed, the timer starts. Stop the timer
with the same switch ("Timer start") as start, or with the
switch assigned the "Lap reset" function.
- Linking only start to the throttle
trigger
Select the setting item "Timer
start" by (JOG) button up, down,
left, or right operation and press
the (+) and (-) buttons simultane-
ously for about 1 second. When
the set beeps and the status display switches from "Timer
start" to "Ready", the system enters the trigger operation
ready state. When the trigger is operated at the forward side,
the timer starts. (Status display "Timer start")
3
(Timer reset operation)
When the switch ("Timer reset") assigned by function select
switch function is pressed, the timer is reset.
When a switch is not set, select
"Timer reset" by (JOG) button up
or down operation, and press the
(JOG) button. A beeping sound is
generated and the timer is reset.
Using the Up timer