Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 62)

Tu
rn
Turn
Re
turn
Retur
n
100% 1%
Servo operation is delayed.
Adjustment buttons
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value "0" by
pressing the (+) and (-) buttons
simultaneously for about 1 sec-
ond.
Adjustment range
1~100% (each direction)
At 100%, there is no delay.
Setup item selection
- Select by (JOG) button up or
down operation.
The steering speed adjustment "Turn" and "Return" can be controlled with digital trim
DT1-DT6 or digital dial DL1 etc. with the function select dial function. (p.101)
Dial / Trim Setting
62
Fu
n
c
tio
n
Steering Speed
(Preparation)
- Select the setting item "Turn" by (JOG) button up or down op-
eration, and make the following adjustments:
1
"Turn" direction adjustment
Use the (+) or (-) buttons to adjust the
delay amount.
Steering Speed adjustment
2
"Return" direction adjustment
Select the setting item "Return" by
(JOG) button up or down operation,
and use the (+) or (-) buttons to adjust
the delay amount.
3
When ending setting, return to the speed screen by pressing the (END) button.