Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 70)

HOME
screen
MENU 2
screen
or
MENU 1 screen
Trigger point
5~95
Mode (Start function)
ON/OFF
Preset (Servo position )
0~100%
Press
Press
Pu h Press
Press
70
Fu
n
c
tio
n
Start Function
Start Function Operation
- When the throttle trigger is moved to the preset position (trigger point), the throttle
servo moves to the preset position.
- When the throttle trigger is operated slowly so that the wheels will not spin, the car au-
tomatically accelerates to the set speed.
7KLVIXQFWLRQLVHIIHFWLYHRQO\IRUWKH¿UVWWKURWWOHWULJJHURSHUDWLRQDWVWDUWLQJ7KLV
function has to be activated before every start.
- When the throttle trigger is returned slightly, the Start function is automatically deacti-
vated and the set returns to normal throttle trigger operation.
Start Function (Throttle system)
If the track is slippery and you begin to accelerate by pushing the trigger to full throttle,
the car wheels will spin and the car will not accelerate smoothly. When the Start function is
activated, merely operating the throttle trigger slowly causes the throttle servo to automati-
cally switch from the set throttle position to a preset point so that the tires do not lose their
grip and the car accelerates smoothly.
With "Start function":
Quick start without skidding Without "Start function":
Slow start due to skidding
(Preparation)
- Select the setting item "Mode" by (JOG) button up or down op-
eration. Press the (+) or (-) button and select "ON".
- Select setup item "Trigger point" and make the following ad-
justments.
Start function adjustment
Status
Off
Ready
Active