Change slot – Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS User Manual

Page 139

Sensor menu screen

139

Fu
n

tio

Sensor Menu

Change Slot

This procedure changes the slot number of one registered sensor. Connect the sensor as
VKRZQLQWKH¿JXUHSDQGFKDQJHVORWQXPEHULWE\WKHIROORZLQJSURFHGXUH

This function is set when using multiple telemetry sensors of the same type.

(Change)

Select "Slot No. change" by (JOG) button up or down opera-

tion and press the (JOG) button. A sensor details screen is

displayed.

Sensor slot change

Select "Load" by (JOG) button up

or down operation and press the

(JOG) button. The message "Reading

suceeded" appears and the current

sensor information is displayed.

Setup item selection
- Select by (JOG) button up or

down operation.

Select button
- (JOG) buttons pressed.

Select "Slot No." by (JOG) button up or down operation and

set the new number by pressing the (+) or (-) button.

Select "Write" by (JOG) button up or

down operation and press the (JOG)

button. The message "Settings writ-

ten" appears and number change is

complete.

Press

When ending setting, return to the Sensor menu screen by pressing the (END) button.