Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 115)

T4PX transmitter or microSD
card selection
115
Fu
n
c
tio
n
microSD card storage destination
When a microSD card is installed in the T4PX, a folder called "Futaba" is created, and folders
called "LOG" and "MODEL" are created in it. The "MODEL" folder contains the model data.
When the T4PX model data is copied, and the copy source data
is selected from the model data stored in the microSD, a model
list like that shown at the left is displayed.
Model data
Model Copy
4
When ending setting, return to the menu screen by pressing the (END) button.
Setup item selection
- Select by (JOG) button up or
down operation.
Model number selection
- The (JOG) button are pressed
2
(Copy destination model selection)
Select the setting item "Copy Source"
by (JOG) button up or down opera-
tion, and press the (JOG) button. A
list of the model numbers saved in the
T4PX transmitter is displayed. Select
the model by (JOG) button up or down
operation, and press the (JOG) button.
When a microSD card is installed in
the T4PX transmitter, a screen for se-
lecting the models in the T4PX trans-
mitter (Internal memory) or the models
in the microSD card is displayed.
After selecting the screen by (JOG) button, select the model.
-The model currently in use cannot be selected.
-Since the copy destination cannot be overwritten when it is in a microSD card, a models list is not displayed and
the model is saved directly to the microSD card.
3
(Copy execution)
After checking that the copy source
and copy destination models are cor-
rect, select the setting item "Copy ex-
ecution" by (JOG) button up or down
operation, and press the (JOG) button.
The confirmation message "Are you
sure" appears. To execute copy, select
"Yes" and to cancel copy, select "No"
by (JOG) button.
When the copy destination model
name becomes the same name as the
copy source, copying is complete.