Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS User Manual
Page 153
153
Fu
n
c
tio
n
Calibration
1
(Throttle neutral adjustment)
After lightly pulling the throttle trigger to the left and right,
press the (JOG) button in the state in which the trigger is not
touched. If neutral correction is OK, the end point correction
screen appears. If not within the correction range, the end
point correction screen will not appear.
Throttle adjustment
(Preparation)
Select "Trigger" (throttle side) by (JOG) button left or right
operation and press the (JOG) button. The neutral correction
screen appears.
2
(Steering travel adjustment)
In the end point correction screen (figure at the right) state,
lightly operate the trigger to the full forward and full brake
side and press the (JOG) button. If end point correction is
OK, the display returns to the adjuster screen. If not within
the correction range, the display will not return to the adjuster
screen. In this case, return to the system menu by pressing
the (END) button. When operation cannot be ended normally
even when correction is repeated, and cannot be ended nor-
mally, contact the Futaba Service Center.
3
When ending setting, return to the system menu screen by pressing the (END) button.