Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 73)

With A.B.S.
Without A.B.S.
Setup items
Mode (Function On/Off)
Brake return amount
Delay amount
Cycle speed
Trigger point
Duty ratio
Steering mixing
HOME
screen
or
MENU 1 screen
The servo view screen is
displayed.
When brake operation enters
the ABS set range, several
"ON" are displayed.
Press
Press
Pu h Press
Press
73
Fu
n
c
tio
n
A.B.S Function
The display appears on the home screen.
Operation display
MENU 2
screen
When trigger ratio (p.66) was set to 100:0, brake operation stops, and the servo does not
operate even if the ABS function is set.
When trigger ratio was set to 100:0
- When the brakes are applied, the throttle servo will pulse
intermittently. This will have the same effect as pumping
the brakes in a full size car.
- The brake return amount, pulse cycle, and brake duty can
be adjusted.
- The region over which the ABS is effective can be set ac-
cording to the steering operation. (Mixing function)
Operation
A.B.S. Function (Throttle system)
When the brakes are applied while cornering with a 4 Wheel Drive
or other type of vehicle, understeer may occur. The generation of
understeer can be eliminated and corners can be smoothly cleared
by using this function.