Function list – Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS User Manual
Page 45

45
Fu
n
c
ti
o
n
M
a
p
Function Name
Description Of Function
Model select
Model memory call
Model copoy
Model memory copy
LED setting
LED on/off, jog LED on/off
S.BUS servo
S.BUS servo Link software setting
Sensor
Telemetry sensors setting
Sensor list
Telemetry sensors list
Telemetry
Telemetry data screen
MC-Link
MC851C/602C/402CR/950CR/940CR
/960CR Link software setting function
Condition
2ND condition
User name
User name set/modify
Battery
Battery type setting
Date and time
Date and time setting
Calibration
Steering wheel and throttle trigger cor-
rection
Display
LCD contrast/backlight setting
End point
End point adjustment
Fail safe
Fail safe, battery fail safe
Information
Language setting / version information
Model name
Model memory name set/modify
Data reset
Model memory reset (Model, Direct
menu, All)
Ch. Reverse
Servo operation reversing
Sound
Sound setting (telemetry sound, alarm
sound, operating sound)
Sub Trim
6HUYRFHQWHUSRVLWLRQ¿QHDGMXVWPHQW
Receiver
Receiver type/servo tyoe selection/
linking with telemetry type T-FHSS
system receiver
Response
etting of the response
Auxiliary
Channel 3&4 servos operation posi-
tion set/check
Function
Description Of Function
Servo view
Displays servo operation on a bar
graph
D/R,ATL
Steering angle adjustment while run-
ning/ Brake side adjustment
Dial select
Selection of functions operated by
digital dial and digital trim
SW select
Selection of functions operated by
push switches
Acceleration
Reduces the "lag time" of the throttle
from the neutral position.
Steering curve
Steering curve adjustment
Throttle curve
Throttle curve adjustment
Steering speed
Steering servo delay
Throttle speed
Throttle servo delay
Start
Throttle preset at start function
Engine cut
engine cut off by switch
A.B.S
Pumping brake
Brake mixing
Front and rear independent brake con-
trol for 1/5GP car, etc.
Tilt mixing
Outboard engine tilt mixing
Trigger
Neutral brake and throttle servo for-
ward side and brake side operation
rate setting/Trigger SW
Idle up
Idle up at engine start
Program.
mixing 1-5
Programmable mixing between arbi-
trary channels
4WS mixing
4WS mixing
Dual ESC
Front and rear ESCs mixing
Gyro mixing
The sensitivity of Futaba car rate gy-
ros can be adjusted
CPS mixing
The CPS-1 of Futaba LED controller
can be adjusted.
Steering
mixing
Twin servo mixing of the steering
Timer
Up, down, lap, or lap navigation timer
Lap list
Lap timer data (lap time, average lap,
best lap time) check
-------
Function List