Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 27)

B
A
Charge unit
mounting screws
Steering wheel unit
mounting screws
27
Bef
ore U
s
in
g
6
Insert the 8WIRE wiring connector onto the charge unit connector, and install the charge
unit and transmitter body with the mounting screws.
7
Install the PS5 switch cap and mounting
plate removed at step 1 at the opposite
side of the transmitter body.
Be careful that the switch body does not get
caught and damaged.
8
Insert the 15WIRE wiring connector onto the steering unit, and install the steering unit to
the transmitter body.
Install slowly so that the wiring does not get pinched.
Installation is easy when inserted in A B order. (Figure at the right)
9
Install the assembled steering wheel
unit and APA to the transmitter using the
screw (3.0x12mm cap screw) supplied.
(Using a 2.5 mm hex wrench.)
Peel the tape installed at step 2.